Introduction: to classify the granularity 2-0.2 millimeters ore and ore slime the rank tungsten, the niobium, the manganese, the chromium, the titanium, the zinc,the gold, the iron and other metallic minerals.

Rotary kiln is burning kiln (commonly known as the Rotary Kiln), the building materials equipment category. Kiln by handling different materials can be divided into cement kiln, metallurgical and chemical kiln lime kiln. Cement kiln cement clinker burning mainly used, the production of dry and wet cement kiln cement kiln production of two categories. Kiln metallurgical chemicals are mainly used for the metallurgical industry magnetized iron steel plant poverty roasting; Chromium, nickel iron oxide roasting; Roasting high alumina refractory plant and soil aluminum ore roasting clinker, aluminum hydroxide; Chemical baking powder chromium and chromium ores and minerals. Limekiln (Limekil

Use:The mineral product flotation machine widely applies in the copper,the lead,the zinc,the nickel,the molybdenym and so on non-ferrous metal,ferrous metal and non-ferrous metal rough sizing,selection and counter-flotation process work.

Purpose: mixing tube for the operation before the flotation pulp mixing, pulp and chemical mixing, creating conditions for beneficiation operations.

Use:this is a new mine selection machine which is developed in the recent 20 years,mainly used in thin grade ferromagetism mineral dry and wet separating.

Ball mill a new type of mill developed by our company,introducing the first-class industrial technique and absorbing the former experience.through dry or wet way,it is widely used in grinding cement production,carbonate,new type construction materials,fireproof stuff,etc.

Explains: drying machine is widly used in building material, metallurgy, chemical industuy, cement to dry the slag, limestone, coal powder,clay,etc.it is simply structure, polished manufacture, high capacity, low cinsumption, conveninent transportation and so on.

Disc feeder is applicable to the following 20mm ore powder feeding equipment.Disc feeder by the device driver, feeder ontology, metrology and measurement devices belt conveyor components. Feeder and belt conveyor driven by a driving device, the device driver with the electromagnetic clutch of feeder opening, stop and change both functional role. Measurement conveyor belt speed is less than 1m / s, in order to speed with a velocity detection device, in order to prevent a deviation detection Weighing roll-adjusted.

PM tailing recycling machine is used to recycle the tailing from all kinds of ores.

Efficient concentrator features are: (a) Add flocculant settlement increased the size of solid particles, thus accelerating the velocity; (2) shorten the installation tilt plate mineral particles from the settlement to increase the settlement area; (3) play a layer of thick mud deposition flocculation, filtration, compression and to handle the volume; (4) equipped with a complete-controlled facilities.

The chute feeder can be installed on the ground or onto discharge port of ore bin. The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore. The chute width is 2-2.5 times of maximum feeding granularity. The biggest chute feeder can supply ore with granularity

This machine is used in classifyling the gold, the silver, the lead, the tunsten, the titanium, the iron(res iron, brown iron) and other ninmetals.

Stuff with different specific gravity falls at different speed in fluid, by this principle and combined with grinders; spiral separator is used to eliminate dust and water in the mining material. Guide for operation: Before starting, firstly check the tightness of all the bolts, then raise the handle to make the machine work without load, after making the deposit move, the machine can work normally. The two ends of the bearing should be always maintained with lubricant.