Introduction:
The chute feeder can be installed on the ground or onto discharge port of ore bin. The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore. The chute width is 2-2.5 times of maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm. The most common specification is 980*1240 chute feeder, with feeding granularity between 350-0mm, which is the best partner of 400*600 jaw crusher.
|
model |
The expected size opening |
The number of swing /min |
Swing itinerary (mm) |
Feeding size (mm) |
Production capacity (t/h) |
Rotating motor | ||
|
kun |
height |
model |
Power (kw) | |||||
|
400×400 |
400 |
400 |
28 |
20-50 |
100 |
2.5-3 |
Y112M-6 |
2.2 |
|
600×500 |
600 |
500 |
30 |
20-50 |
200 |
5-10 |
Y132M-6 |
4 |
|
980×1200 |
900 |
700 |
25 |
20-50 |
250 |
20-40 |
Y160M-6 |
7.5 |
|
800×700 |
750 |
600 |
25 |
20-50 |
250 |
30-50 |
Y1322M-6 |
5.5 |
)
)
)
)
)
)
